Images

V3 RS SOLIDS HELMET [MT BLK] S | Fox Racing - Foxracing.com
V3 RS SOLIDS HELMET [MT BLK] S
V3 RS SOLIDS HELMET [MT BLK] S
V3 RS SOLIDS HELMET [MT BLK] S
V3 RS SOLIDS HELMET [MT BLK] S
V3 RS SOLIDS HELMET [MT BLK] S

Details

https://www.foxracing.com/v3-rs-solids-helmet-%5Bmt-blk%5D-s/27731-255-S.html

V3 RS SOLIDS HELMET

Style #: 27731-255-S
$499.95

Variations

Size Guide
V3 RS Helmet Size Chart

If your measurement falls in-between a size, go down to the smaller size, and customize helmet with thinner (40mm) replacement cheek pads – part # 28723.

Size CM IN Cheek Pad Size Weight
S 55cm - 56cm 21.63" - 22.00" 45mm - # 28724 1220 g (+/-50 g)
M 57cm - 58cm 22.50" - 22.88" 45mm - # 28724 1270 g (+/-50 g)
L 59cm - 60cm 23.25" - 23.63" 45mm - # 28724 1350 g (+/-50 g)
XL 61cm - 62cm 24.00" - 24.38" 45mm - # 28724 1400 g (+/-50 g)
V3 RS Replacement Cheek Pads
Part Name Size Part Number
V3 RS Thin Cheek Pads 40mm 28723
V3 RS Standard Cheek Pads 45mm 28724
V3 RS Thick Cheek Pads 50mm 28725

Using a tape measure, measure the widest circumference around your head. Run the tape measure slightly above the eyebrows (typically .50" -   1.00" ), keeping the tape measure horizontal and rounding the head above the ears. Take several measurements to ensure you have the largest circumference. Alternatively, you could use a string and measure it against a ruler. Apply your measurement to the helmet sizing chart to find your recommended helmet size. If your measurement falls in-between a size, go down to the smaller size, and customize helmet with thinner (40mm) replacement cheek pads -  part # 28723.

 

 

Add to cart options

Product Actions

In Stock


The all-new V3 RS Solids has been designed to include MIPS® impact protection, and our updated MVRS™ system to provide podium-proven performance.

As the most technologically advanced motocross helmet out there, it’s packed with next level features that align with your performance demands. Designed with MIPS® (Multi-Directional Impact Protection System)—an impact technology that manages rotational forces on impact to add a low-friction layer between the helmet and the head—and additional impact and energy dispersing features, the V3 RS provides the kind of protection every racer needs.

Safety and performance go hand-in-hand with this pro-level and race-ready dir bike helmet. Worn and refined by the fastest racers on the planet, the V3 RS is made for motocross champions.

  • Equipped with the Multi-Directional Impact Protection System (MIPS™). Mimicking the cerebrospinal fluid, MIPS™ adds a low-friction layer between the helmet and the head.
  • An evolution to the Magnetic Visor Release System (MVRS™) system positions the visor with a center post magnet and two side shear off screws. The visor is designed to flex under impact prior to breaking away to provide additional rotational impact management
  • Dual density Varizorb™ EPS liner is meant to provide protection by spreading the forces of impact across a wider surface area
  • EPP chin bar maintains lower weight while helping to manage energy during impact
  • EPS is compatible with Eject Helmet Removal System®
  • MCT (Multi Composite Technology) Shell construction that blends Carbon and FRP resins to provide a light yet rigid external shell
  • 4 shell and EPS sizes for best in class fit
  • Injected mesh vent screens provide superior ventilation and airflow, while maintaining protection from dirt and debris
  • Removable, washable X-Static® comfort liner with emergency release cheek pads are antimicrobial and manage odor while wicking moisture away from the head
  • Carbon fiber D rings
  • Meets DOT and/or ECE 22.05 standards