PROTECT WHAT MATTERS
The Fox V2 Murc Helmet is expertly crafted inside and out, providing reliable protection and a graphically stunning design. The helmet exceeds both ECE 22.05 and D.O.T certifications. A fiberglass shell provides durability, and a dual density EPS liner offers trustworthy defense should you end up taking a soil sample.
The MX helmet has exceptional ventilation to prevent overheating on warm days at the track. Ten intake and four exhaust vents provide fresh air and allow heat to escape. This system supplies cooling relief from the smoldering heat.
- Lightweight fiberglass shell construction
- 3 shell and 4 EPS sizes for a precise fit
- Dual-density EPS protection liner
- 10 Intake and 4 exhaust vents for optimum airflow
- Removable & washable liner and cheek pads
- Matching 360 Murc gear set available
- Matte Finish
- Exceeds ECE 22.05
- Exceeds DOT
|Size||CM||IN||Cheek Pad Size||Weight|
|XS||53cm - 54cm||20 7/8" - 21 1/4"||40mm||2.75lbs - 3lbs|
|S||55cm - 56cm||21 5/8" - 22"||35mm||2.75lbs - 3lbs|
|M||57cm - 58cm||22 1/2" - 22 7/8"||35mm||3lbs - 3.25lbs|
|L||59cm - 60cm||23 1/4" - 23 5/8"||30mm||3lbs - 3.25lbs|
|XL||61cm - 62cm||24" - 24 3/8"||35mm||3.25lbs - 3.5lbs|
|XXL||63cm - 64cm||24 3/4" - 25 1/8"||30mm||3.25lbs - 3.5lbs|
Using a tape measure, measure the widest circumference around your head. Run the tape measure slightly above the eyebrows (typically ½” – 1”), keeping the tape measure horizontal and rounding the head above the ears. Take several measurements to ensure you have the largest circumference. Alternatively, you could use a string and measure it against a ruler. Apply your measurement to the helmet sizing chart to find your recommended helmet size. If a measurement falls in-between a size, go up to the larger size.